TILTING FLUME APPARATUS

The tilting flume is designed to conduct various experiments at various bed slopes from 1 in 25 in upstream to 1 in 25 on down stream. The flume has a perspex window to visualize the flow over models fixed in flume. The flume is provided with gates on upstream & downstream side to control the flow. Students can thus conduct the experiments and also visualize the flow. Various experiments like open channel flow study, specific energy curve, hydraulic jump, calibration of weirs, notches and venturi flume can be conducted.

Specifications:

  1. Flume - Cross section 200 wide x 300 mm. deep, length 4 meters, provided with sliding gates, one at upstream and one at downstream side & flow settling chamber at inlet. Screw jack at down stream side to change slope of bed from 1 in 25 in upstream to 1 in 25 in downstream and scale. Transparent window for visualization of flow.Overall length of flume is about 5.5 mtrs.
  2. Notches -
    1. Rectangular notch with flume fitting fixture. (G.M.)
    2. 600 V notch (brass) with flume fitting fixture.
    3. Trapezoidal Notch.
  3. Weirs -
    1. Sharp crested weir - 1 no.
    2. Broad crested weir - 1 no.
    3. Ogee weir - 1 no.
  4. Venturi flume.
  5. Experiment on Hydraulic jump.
  6. Trolley mounted point gauge for level measurement of water. Trolley can be traversed for whole length of flume.
  7. Venturimeter & differential manometer for measurement of flow.
  8. 2 HP pump and sump tank for recirculating the water.

 

tilting flume apparatus for experiments like open channel flow study, specific energy curve, hydraulic jump, calibration of weirs, notches and venturi flume - Jagajeet marketing and jemstestrigs.com