FRANCIS TURBINE TEST RIG (1 KW CAPACITY – 5HP SUPPLY PUMP)

  1. Test rig consists of a Francis water turbine designed for laboratory experimental purpose and to conduct test in metric units. The specifications of the turbine are as follows:-
    Normal Speed - 2200 RPM.
    Capacity - 1.0 KW
    The unit consists of a cast iron casing, a rotor assembly of shaft, gunmetal runner and a brake drum all mounted on a suitable sturdy base. Guide vanes are provided in the turbine to regulate the flow into the runner. A conical draught tube is connected to the turbine outlet by a bend. A rope brake arrangement with a spring balance is provided for loading the turbine. Pressure gauge and vacuum gauge are fixed at the inlet and outlet to measure the net supply head to the turbine.
  2. Water to the turbine is provided by a centrifugal pump set of 5 HP capacity. The pump operates on 440Volts, 3 Phase, 50 Hz line.
  3. Other standard accessories include a DOL starter, switch, flow control valve, suitable piping.
  4. Flow measuring unit consists of a venturimeter with pressure taps connected to two pressure gauges mounted on a panel board.
  5. The complete test rig is mounted on a storage tank of 500 liters capacity. The tank is provided with FRP lining for total rust protection

 

Francis Turbine Test Rig - Jagajeet marketing